Woodturning Finish Using Stick Fast Thin Cyanoacrylate Adhesive 4-1/2 Ounce Bottle (CA Glue)

Stick Fast Thin Cyanoacrylate Adhesive 4-1/2 Ounce Bottle (CA Glue)

I used to wonder what CA finish was. I watched Cap’n Eddie do some CA finishes and the mystery was gone!

CA finish is basically just using superglue as a finish for your small wood turning products. CA, superglue or Cyanoacrylate Adhesive comes in thin to thick, it can be used for finishes, or fixing cracks or voids …even as a stablizer for soft wood.

You can find CA on Amazon or your local wood working store…. support these guys, I  think the Cap’n sells it too….. www.eddiecastelin.com 

You can learn a lot from Cap’n Eddie Castelin about wood turning, I sure did. He got me through all the basics, now I would like to pay him back by sending some traffic his way. I pay him back by asking people to visit his site, and to visit his youtube account https://www.youtube.com/user/capneddie  for all he has done …. he served our country and taught me how to turn wood…..Making Shavings!

Purchase 4 or 16 ounce CA packages for your woodturning finishes!

I started off buying some CA or superglue from Harbor Freight and Menards. You get little tubes and if you don’t use the whole tube it goes bad fast! Do youself a favor and buy one of the 4 ounce or 16 ounce packages if you plan on using it for finishing some of your woodturning projects.

Testimonial on CA Finishes

I grabbed the below comment from Amazon about CA glue and CA finishes.

CA THIN
By Wayne Edgeworth on Aug 25, 2017

A great product for wood turning. Sets fast and holds strong. I have used this on several lathe projects that had small cracks and it has held strong. It is hard to sand once it sets up, but a light cut with a lathe knife or scraper will take care of that. It does have a strong odor, you may want to use a respirator or a fan. I’d recommend this product.
Safety warning: use in ventilated area, do not breath vapors, wear eye protection, do not get on skin or clothes, if you do get it on your skin just wash off with water. Be very careful because this stuff can get very hot and has a chance to spontaneously combust.

Check out some of the
finishes on these woodturnings!

CA Finish using Stick Fast Thin Cyanoacrylate Adhesive

CA Finish using Stick Fast Thin Cyanoacrylate Adhesive
CA Finishes using superglue or CA Finish using Stick Fast Thin Cyanoacrylate Adhesive
CA Finish using Stick Fast Thin Cyanoacrylate Adhesive
CA Finishes using superglue or CA Finish using Stick Fast Thin Cyanoacrylate Adhesive

Here’s Cap’n Eddie on CA Finishes

You’ll see the Captain at work using CA for woodturing finishes, if you’re new at this you must be confused and wondering “what the heck is CA?” Well, CA is superglue or Cyanoacrylate Adhesive which turns out that it really is more than just glue, you can use it as a finish on wood that looks just awesome.

Please remember to use proper saftey practices when using this finish, use protection on your hands (gloves) and use a proper mask while adequately ventilating your workspace!

 

Make Your Own Wood Finish O.B. Shine Juice with Cap’n Eddie

Make Your Own Wood Finish
O.B. Shine Juice with Cap’n Eddie

There are 100’s of ways to finish your wood turning projects. Cap’n Eddie has what he calls ob shine juice to seal and put a basic finish on your wood project. You can further finish your project by applying a different type of finish on top of your ob shine juice finish. He even says you can apply this to something that already has a finish ….guess you’ll just have to test it.

How To Make O.B. Shine Juice

He gives you the formula in the video and it consists of:

  1. one part boiled linseed oil
  2. one part clear shellac finish
  3. one part denatured alchohol

Eddie has a bunch of differnet finishes he likes to use, I’ll do a Finish section for wood turning projects of all kinds from all different wood turners, so come back and check out this category everynow and again…… heck I might even put Cap’n Eddie’s secrect formula on a downloadable .txt file so you can pin it the wall right next to your lathe.

CA Finish ….How to Use it on
Wood Turning Projects

Hey…. did you know you can use superglue for a wood finish on your turning projects? There are all kinds of special ways to apply and precautions to take…. I’ll do a section on finishing with CA products, cap’n eddie uses this a lot, so do most of the big name wood tuners.

Watch the famous Cap’n Eddie at work and remember to support the guy by purchasing his products, jigs, tools and anything else he has on wood turning

Here is the receipe for OB Shine Juice Directly from Capn Eddie

Or Go to this URL
http://eddiecastelin.com/yahoo_site_admin/assets/docs/shinejuice.54184110.pdf

Remember…. Keep Cap’n Eddie busy and buy his tools and products at http://eddiecastelin.com/